top of page


Photography by Unknown

Available finishes

Fascia - Anodised Aluminium or Black Acrylic

Current models

M9 Phono

M9 Phono Signture


M9 RIAA Signature


The Audio Note (UK) M9 Pre Amplifier is without doubt or question, the finest Phonostage equipped preamplifier we have ever produced, and the Line Stage is only surpassed in performance by our own M10 Line. As one would expect, no expense has been spared in the construction of the circuit or the components used, and is a full Audio Note (UK) Level 5 product.


It is well known that the accurate reproduction of music, not just sound, requires the purity of the incoming signal to be preserved. It is therefore not difficult to conclude that, in order to achieve this goal and to retain the musicality of the original performance, the complexity of the circuitry itself must be kept to a minimum. In response to this, the M9 preamplifier uses a single-ended, zero feedback circuit topology. This is simply the most linear design possible, demanding pure Class A valve operation and removing the need for a phase splitter, which introduces unnecessary crossover distortion.


In contrast to the majority of the audio industry, we design our circuits with the aim of minimising non-harmonic and time base anomalies, rather than producing vanishingly small harmonic or low intermodulation distortion measurements. These non-harmonic amplitude and time base distortions have a highly perceptible and adverse affect on the signal waveform, and it is far more important to address these factors than participate in the increasingly irrelevant numbers game that chases „perfect measured response‟.


As a result, the M9 was designed for maximum linearity and minimum transient distortion, and avoids the need for detrimental „corrective‟ measures, such as inherently error-prone feedback loops.


The phonostage installed in the M9 is without equal or parallel, and uses the finest possible components to produce a sound quality that is truly outstanding.


Unlike the majority of preamplifiers available today, the M9 Phono preamplifier is equipped with a „Stereo / Mono‟ switch, to maximise the performance and enjoyment of the large quantity of high quality mono recordings that are still available.


The M9 features a pair of correctly engineered balanced / XLR inputs for sources with suitable balanced outputs. Each input is connected directly to an in-house custom designed and produced, silver wired input transformer, which offers the finest possible input for your XLR Line level source outputs.


Each stage of the preamplifier is powered by an independent power supply, housed in a separate chassis chassis. As one would expect, the output transformers for the M9 are some of the finest possible examples we can produce. Each transformer is fully silver wound, and feature our own 55% nickel iron C-Cores.

Technical Specifications








100K Ohms - Line Level

47K Ohms - Phono

<10 Ohms

30 kg (between two units)

140mm (h) x 440mm (w) x 410mm (d) - PRE

140mm (h) x 440mm (w) x 410mm (d) - PSU

AC 100-120V / 220-240V  50/60Hz

81 Watts


Due to Audio Note (UK)'s ongoing research and development program, specifications are subject to change without notice.

bottom of page