top of page

AN-E Signature Stands

Photography by Unknown

Available finishes

Matte Black


These hollow stands are purposely designed to house the crossovers for a pair of AN-E Signature speakers, as an alternative to the standard externally housed crossovers. For this, the stands should be ordered simultaneously with your Signature speakers.

Not only does the sleek design save space, it also adds a more elegant look to the AN-E; accentuating the stunning Wood Veneer.

The stands can be purchased without Signature speakers. Please contact your local Audio Note distributor/dealer. If they are used without parts inside, the stand cavities should be filled with a suitable high-density material such as metal shot / particles or sand. If sand is used, please ensure that it is a pre-dried (often referred to as ‘kiln dried’) type, and not moist. The sand supplied for fish tanks or children’s sandpits is ideal, as this has usually been cleaned and is dry; construction grade ‘sharp’ sand is not suitable in standard form, due to the water content. It may also be necessary to ‘seal’ the junctions between the base plate and the bottoms of the box section legs, to prevent sand escaping. Any pliable, slightly adhesive material; such as Plasticine or Blu-Tack, is ideal for this.

Technical Specifications




15kg per stand, excluding crossover parts


Due to Audio Note (UK)'s ongoing research and development program, specifications are subject to change without notice.

bottom of page